Have you buyed WONLINK WL-NE3501 WiFi Extender to extend your home network? Got confused how to install & setup the device in your home network. You land on the right page, here you will get detailed information on Wonlink extender setup along with the device specifications and other important information. Wonlink extender device will receive signals from your home router device and then extend it. The device will amplify signals across the space and eliminate the dead zone or weak signal zone. 

Wonlink WL-NE3501 WiFi Extender 

Wonlink WL-NE3501 WiFi Extender is a dual band device. You can easily setup the device by using WPS or web interface method. The device offers a combined speed up to 1167 Mbps through both the frequencies. From 2.4GHz frequency the device offers 300 Mbps speed whereas through 5GHz frequency it offers 867 Mbps It has the latest MU-MIMO technology to offer uniform speed across up to 25 devices. With the wonlink extender setup you will get a stable connection at your home. The device has the capability to extend the network up to 6000 Sq. Ft. 

When we talk about the design of the device, it is a simple wall plug device. You can easily install it. On the front panel of the device a WPS/ Reset button along with three WiFi signal LEDs is given. On the back panel you will see a power plug whereas on the bottom you will see a WAN/LAN port to establish wired connection. Also to transmit the signals and enhance strength, the device has four powerful external antennas. 

WL-NE3501 WiFi Extender Installation

As i said already it is a compact wall device, hence you can easily install it. You need a power plug to connect the device. Before plugging in the device you need to find an adequate location. Keep it within the range of your router device so that the device receives signals and then amplifies them effectively. Although proximity may be required for the setup. Once the wonlink extender setup completes, you can move it to another position. You can enhance the performance of your home network with the adequate placement of the device.

Wonlink Extender Setup Via WPS

Setup of the WL-NE3501 WiFi Extender device by using the WPS button is more quick and easy. It involves following steps:

• You need to locate the WPS of the router device you have at your home. 

• Thereafter you need to press the WPS of your WL-NE3501 WiFi Extender device. 

• Next you need to press the WPS of the router device you have at your home. 

• You should complete the process within 2 minutes so the wonlink extender setup completes successfully. 

• Wait and monitor the device LED to confirm the process is complete or not. 

• After successful completion of the setup you can move ahead and relocate the device. 

• Also check the new network to verify the speed and signal strength.

Wonlink Extender Setup Via Web Interface

You can set up your wonlink extender via using a web interface. To proceed with this method of setup you need to read the below given steps:

• Firstly you have to take a laptop or computer device and connect it to the wonlink extender network. 

• Thereafter launch a web browser of your choice and then type IP 192.168.10.1

• Click on enter option and login page will display on the screen. 

• Use the default information to login to the portal and move ahead with the setup. 

• Choose your home network name from the list of WiFi that appears on the screen. 

• Thereafter provide its password and click on save settings

• The device will reboot itself automatically, waiting for it to boot up again. 

• Once the device boots up, test the network by connecting a WiFi enabled device. 

• Also you can relocate the device to enhance the performance of the network. 

While placing the range extender device keep it in mind that the device should be within the range of the main network device. Also no radio frequency device is nearby to interfere in the signal transmission. Furthermore, keep it in between the host network and no signal zone to avoid weak signal issues. 

Conclusion

In the crux of the above description we have concluded that the wonlink extender setup is a very quick and easy process. There are two ways to complete the wonlink WL-NE3501 WiFi Extender setup. The first one is by using the WPS button and the other one is through the web interface. WPS method is a quicker way as compared to web based method. Also, the WPS method is less time consuming. However the web interface method offers more advanced security features to enhance your network security. With a web interface you can create a separate security key for your extender network.