Get Wide Coverage With Wavlink Wifi Repeaters

We live in a world where the internet plays a crucial role in all our lives. All our daily tasks revolve around the use of the internet. From shopping, payments, work to education everything requires access to the internet. So if you are also facing the issue of poor connectivity or dead zones in your home then it's time to upgrade your networking system. One single router can provide connectivity to a certain extent. But if you want wider coverage and high speed internet for every device then you should invest in a wifi repeater. The market has a lot of options in this category but one that stands out is none other than Wavlink. Wavlink offers a vast range of wifi repeaters. You can easily choose the one that aligns perfectly with your home structure.

Understanding Wifi Repeaters

Wifi repeaters are also known by the name of wifi range extenders and boosters. As the name itself suggests it is a networking device that helps in extending the reach of your existing wifi. It covers every single corner of your home. Thus it eliminates all the dead zones and the connectivity issues. It works in collaboration with your existing router. The extender takes the signals from the router, multiplies them and then broadcasts the signals in the different areas of your home. This is how you can get lag free internet experience.

Wavlink Wifi Repeater Setup

Now let's move on to see how we can set up the Wavlink wifi range extender. 

• Preparing for Your Wavlink 192.168.10.1 WiFi Repeater Setup

Before we begin with the setup process lets first gather all the required components. This is everything that you need:

✓ Your Wavlink Wifi Repeater 

✓ The main router information like its username and password.

✓ Any smart device for configuration.

✓ Lastly, the user manual of your specific Wavlink Extender model.

• Placement

The next step is to place your Wavlink wifi repeater near to the host router. For a successful setup the placement is very important. So consider the following points for a proper placement:

✓ Firstly, do not place the range extender too far from the host router. The ideal place is in the center of your home in between the router and the area with poor connectivity.

✓ Secondly, do not keep any electronic or metal items near the wifi repeater. As it can mess up the signals. 

✓ Next, avoid placing the extender in between any thick walls or glass walls.

• Power On

Once you found the perfect spot for the placement it's time to switch on the wifi repeater. For this connect your extender to the wall plug. Switch it on. Wait for at least 1 minute to let the wifi repeater boot up properly. Check the power LED status on the extender, if you notice a solid green light then move ahead to the next step.

• Connect 

Further, take any device like your smartphone or your computer. Go to the wifi settings and connect to the network name Wavlink. Once your device is connected to the extender’s wifi network then open a web browser. In the address bar type the default IP address which is 192.168.10.1 and Press Enter. 

• Login

Now, the extender's login page will appear on your screen. You have to fill up the default username and password. Look for the accurate details in the user guide. Once logged in follow these steps to complete your 192.168.10.1 wifi repeater setup. 

✓ Look for an option labeled Repeater or Range Extender and click on it.

✓ The extender will scan for all the available networks. You choose your primary Wi-Fi network and enter its password.

✓ Now just follow all the on-screen prompts to complete the 192.168.10.1 wifi repeater setup. 

• Testing Your Setup

Once you have completed the 192.168.10.1 wifi repeater setup, it's time to test it:

✓ Take any device and connect it to the newly created network. 

✓ Next, start using the device in the area that previously had poor connectivity or was a complete dead zone.

✓ If you face any connectivity issue then reposition the extender. Take the advantage of smart LED indicators that tells you about the signal strength. 

How To Reset The Wavlink Extender?

If by any chance you messed up with the setup process and now are stuck in between then do not worry. Just reset the extender to its factory default settings. It will wash off all the steps that you performed previously. To reset firstly, look for the reset button on the extender. Secondly take a paper clip and with its help press the reset button for about 10 to 20 seconds or until the LED lights fades away completely. Now release the button and that's all now your extender is ready for the fresh setup.

Connect For Support !

Do you have any queries or issues related to the wifi repeater? If yes, then feel free to connect with our experts.